Home > Driver for 2phase hybrid stepper motor >

Stepper Motor Driver JB244M DC12-40V 4.0A 200Microstep

Product Categories

AC Servo motor [32]
Closed loop stepper motor [12]
Geared motor [17]
Brushless DC motor [31]
Dual shaft stepper motor [9]
Motor with brake [34]
2phase hybrid stepper motor [189]
3phase hybrid stepper motor [119]
Driver for 2phase hybrid stepper motor [13]
Driver for 3phase hybrid stepper motor [6]
AC servo motor driver [2]
SANYO DENKI [40]
Embroidery machine motor [1]

Shenzhen Jingbo Mechanical & Electrical CO.,Ltd

Contact Now

Stepper Motor Driver JB244M DC12-40V 4.0A 200Microstep

Ask Lasest Price
Brand Name :	Jingbo
Model Number :	JB244M
Certification :	CE
Delivery Time :	in stock
Payment Terms :	T/T, Paypal, Western Union
Supply Ability :	500pcs per week

Add to Cart

Product Details
Company Profile

Stepper Motor Driver JB244M DC12-40V 4.0A 200Microstep

Stepper Motor Driver JB244M DC12-40V 4.0A 200Microstep

Features

High performance, low price

16 channels constant angle and constant torque microstep, highest microstep is up to 200

An unique control circuit is adopted

Upmost response frequency amounts to 200Kpps

Once the pulse stops over 100ms, the phase current will automatically cut by half

Bipolar constant current chopper control

Driving current is continuously adjustable from 0.5A/phase to 4A/phase

Single power input, voltage range: DC12-40V

It can match 2 phase 6 leads or 8 leads hybrid stepper motors whose current is under 4A, flange size ranges from 42mm to 57mm.

Wiring example

Running current setting

Stepper Motor Driver JB244M DC12-40V 4.0A 200Microstep

Input signal timing diagram

Stepper Motor Driver JB244M DC12-40V 4.0A 200Microstep

Microstep setting List

Microstep

128

100

200

OFF

ON, Double pulse: PU is Clockwise pulse signal, DR is counterclockwise pulse signal

OFF, single pulse: PU is step pulse signal, DR is direction signal

Self detect switch (OFF: accept external signal, ON: send out 7.5KHz pulse by the driver，the microstep should be set more than 8)

Terminal function

Mark	Function	Notes
O.H	Alarm indicator	The red indicator lights when overheat occurs.
TM	Power indicator	The green indicator lights when signal TM is effective.
Im	Current setting adjuster	Adjust motor’s phase current. Turning it clockwise will increase the current output, counterclockwise will decrease
PU+	Step pulse signal+	It can connect +5V or +24V, but an extra resistor is needed if it connect +24V
PU-	D2=OFF, PU is pulse signal	Effects on falling edge, the motor goes one step as the pulse input change from “high” to “low”. Input resistance is 220Ω. Requirement: low voltage:0-0.5V, high voltage:4-5V, pulse width >2.5μs
PU-	D2=ON, PU is clockwise pulse signal
DR+	Direction control signal+	It can connect +5V or +24V, but an extra resistor is needed if it connect +24V
DR-	D2=OFF, DR is direction control signal	Change motor’s direction of rotation. Input resistance is 220Ω. Requirement: low voltage:0-0.5V, high voltage:4-5V, pulse width >2.5μs
DR-	D2=ON, DR is counterclockwise pulse signal
MF+	Motor Free signal+	It can connect +5V or +24V, but an extra resistor is needed if it connect +24V
MF-	Motor Free signal-	Once effects, it will cut off the motor current, the driver stops working and sets the motor free
FL+	Overheat protection signal+	It can connect +5V or +24V, but an extra resistor is needed if it connect +24V
FL-	Overheat protection signal-	The motor current is cut off automatically and signal FL is effective (low voltage) when temperature of the driver is over 70℃. The driver will restart working and clear the FL signal when the temperature falls to 50℃。
V+	Power+	DC12-40V
V-	Power-	DC12-40V
AC、BC	Connect to the motor
+A、-A
+B、-B

! Caution

1. Do not reverse the power input, input voltage should not exceed DC40V.

2. Input control signal is 5V, current-limiting resistance should be connected when it is over 5V.

3. Alarm indicator O.H lights and the driver stops working when the driver temperature is over 70℃. It will restart to work automatically until the temperature falls to 50℃. The heat sink is needed when overheat occurs

4. 6 or 8 leads motors have to be used due to the special control circuit in the driver.

Product Tags:

motor driver

servo

stepper motor

Stepper Motor Driver JB244M DC12-40V 4.0A 200Microstep

Inquiry Cart 0

Send your message to this supplier


*From:	Your email address is incorrect!
*To:	Shenzhen Jingbo Mechanical & Electrical CO.,Ltd
*Subject:	Subject is empty!
*Message:	For the best results, we recommend including the following details: -Self introduction -Required specifications -Inquire about price/MOQ Characters Remaining: (0/3000) Please enter 20 to 3000 characters to contact this supplier!

Explore more Driver for 2phase hybrid stepper motor products from this supplier

Find Similar Products By Category:

Toys

Hot Searches: